Skip to content

Brazilian manufacturer since 1948 · Exports to more than 30 countries

Frequently asked questions

Updated on By Moinhos Vieira – technical team

How a hammer mill works, other types of mills, delivery in Brazil and abroad, spare parts, technical assistance and which mill is ideal for your business.

What does a hammer mill do?

A hammer mill is a mill whose purpose is to crush or grind aggregate material into smaller pieces by the repeated blows of small hammers. These machines have numerous industrial applications.

How does a hammer mill work?

The hammer mill consists of a steel drum with a rotating shaft, where hammers are attached. The material is fed through a hopper and is crushed by the hammers rotating at high speed. The crushed material is expelled through screens with selected size.

Are there other types of mills? What are they used for?

Yes, there are several types of mills for different applications and materials. Each type has its own design and mechanism to crush, pulverize or grind. Some of the most common are:

  1. Ball mill: impact grinding with steel balls.
  2. Roller mill: crushes material between heavy rollers.
  3. Disc mill: grinding by friction between two discs.
  4. Rod mill: uses rods for grinding.
  5. SAG mill: combines impact and friction grinding.
  6. Knife mill: cuts material with blades.
  7. Jet mill: pulverizes with compressed air.
  8. Colloid mill: grinds down to colloidal sizes.

The choice of mill type depends on the application and the material to be processed.

Does Moinhos Vieira deliver throughout Brazil?

Yes, we deliver throughout Brazil. Contact us to learn more.

Does Moinhos Vieira deliver outside Brazil (export)?

Yes, we serve Latin America, Europe and North America. Get in contact with our foreign trade experts to find out more.

Exports to more than 30 countries in Latin America, Europe and North America.

Does Moinhos Vieira supply parts for the mills?

Yes, we supply all parts and screens, contact our parts and solutions experts to find out more.

Does Moinhos Vieira have technical assistance?

Yes, we offer technical assistance service throughout Brazil and Latin America. For other locations, only virtual service.

Which mill is right for my business?

It depends on the production volume, estimated return, etc. To find the mill that best fits your business, we suggest you contact our grinding experts.

Didn’t find what you wanted? Get in touch with our Technical Assistance.

Price, export, installation and maintenance of Vieira mills

How much does a Vieira hammer mill cost?

Moinhos Vieira does not publish prices: a specialist prepares the quote based on the product you will grind and the desired capacity and, if needed, a free grinding test with your sample.

How to choose a hammer mill · Request a grinding test

What is the difference between the MCS, MCD and MCO series?
  • MCS Series (Single Centrifugal Mill): It has one grinding chamber. The product is drawn in by suction, ground through 360° by the hammers and carried by air to the bagging cyclone. Low to medium capacity, 3 to 15 hp.
  • MCD Series (Double Centrifugal Mill): It has two grinding chambers in the same machine: pre-grinding happens in the 1st chamber and final grinding in the 2nd, the larger one. The screen of the 2nd chamber sets the final particle size. Medium to high capacity, 20 to 125 hp.
  • MCO Series (Centrifugal Mill for Oilseeds): It has one grinding chamber and is the series for oily and sticky products, which the MCS and MCD series do not process. For oily and sticky products, 5 to 12.5 hp.

See all models side by side.

Which motor should I choose: the smaller or the larger one?

The MCS 280, MCS 350 and MCD series models are sold with two motor options: the frame takes either one. For fine grinding, with a screen below 1.2 mm, choose the smaller motor, because the limit is the grinding chamber, not the power. Above 1.5 mm, choose the larger motor. Between 1.2 and 1.5 mm, a specialist will recommend the motor.

Single-motor models: MCS 190 (3 hp), MCO 260 (5 hp) and MCO 520 (12.5 hp).

Step by step in how to choose a hammer mill.

Does the hammer mill need a concrete base or anchoring to the floor?

Across the whole Vieira mill line, no: thanks to the mill's balance, it does not need to be fixed to the floor. On the MCD series, the mill must stand on a solid surface, free of vibration, and away from machines that vibrate.

See the unloading, placement and electrical installation guide.

Is the hammer mill three-phase? Is the starter included?

MCS 190 runs on single-phase power. The other models (MCS 280, MCS 350, MCD series and MCO series) use three-phase power. On the MCS 280, MCS 350 and MCD series models, the electrical connection must be made by an industrial electrician.

Starter:

  • MCS 190: starter switch with ammeter (included).
  • MCS 280, MCS 350 and MCO series: not included, we suggest a star-delta starter or a soft-starter, as required.
  • MCD series: not included, soft-starter recommended.

Compare in the table of all models.

What comes with the hammer mill?
  • MCS 190: comes with a cyclone, a bag filter housing with filter bags and a feed hopper.
  • MCS 280, MCS 350, MCD 530 and MCD 680B: leaves the factory assembled, tested and adjusted; comes with a polyethylene cyclone with tripod, a bag filter housing with filter bags and a feed hopper.
  • MCD 680A: leaves the factory assembled, tested and adjusted; comes with a cyclone, a bag filter housing with filter bags and a feed hopper.
  • MCD 950: leaves the factory assembled, tested and adjusted; comes with a cyclone and a bag filter housing with filter bags.
  • MCO series: has no cyclone and no bag filter unit (housing and filter bags).

Spare parts: hammer mill parts.

How often should the bearings be lubricated?

Every 30 days or 200 working hours, depending on use, always with the mill switched off and with NLGI 2 grease. This applies to MCS 280, MCS 350 and MCD series.

See the bearing lubrication guide.

Why has the mill lost output?

The most common causes are worn hammers, a worn or clogged screen, the cyclone closed during grinding and blocked pipes. Turning or replacing the hammers and replacing the screen usually restores output.

See each symptom in the troubleshooting guide.

Is the grinding test free of charge?

Yes. Send a sample of your product: with the grinding test we recommend the model, the screen and the capacity for your case.

Request a grinding test

Chat on WhatsApp

Fill in the fields and you will go straight to our team's WhatsApp.

We use the data in this form to answer your request and prepare our sales response. If you accepted statistics or marketing cookies, the pages you visited on this site will be linked to your request. Learn more in our Privacy notice.