Skip to content

Brazilian manufacturer since 1948 · Exports to more than 30 countries

MCS Series · Single Centrifugal Mill

Hammer mill MCS 350 (10 hp)

Updated on By Moinhos Vieira – technical team

The MCS 350 Single Centrifugal Hammer Mill (10 hp) is the second mill in the MCS series. It is a larger grinding machine than its predecessor (MCS 280 Hammer Mill), as it is equipped with double the motorization, in this case 10 HP/hp.

Motor power
10 or 15 hp
Production capacity
85 to 1,000 kg/h
Screen hole size
0.3 – 6 mm
Particle size
up to 120 MESH
Hammer mill MCS 350 (10 hp)

Ask about grinding on the MCS 350

Answers based on the grinding tests Vieira has already run. Figures are estimates, confirmed in the free test with your sample or with our technical service team.

Do not write personal data here. To be contacted by our team, use the button below.

Request free test / quote

Main features

The Vieira MCS 350 Mill (10 hp) is the right equipment for those who need to increase their production capacity without giving up space and flexibility when grinding various food products. Easy to handle, robust and compact, it is ideal for good production in small spaces and also for places where electricity is limited, as it uses a motor of only 10 Hp.

  • Made from 304 stainless steel or 1020 carbon steel with white epoxy paint
  • Easy replacement of spare parts such as hammers, screens and rotor
  • High output ratio
  • A 360° grinding box
  • Does not need to be fixed to the ground
  • Continuous suction feed
  • Designed for micronizing grains, cereals and spices
  • Guaranteed technical assistance and maintenance

Specifications

Specifications · MCS 350
SeriesMCS Series · Single Centrifugal Mill
Motor power10 or 15 hp
Shaft speed6,000 rpm
Weight with motor170 kg
Number of hammers30
Working area (without cyclone)1.5 m²
Full installation length3.7 m
Production capacity85 to 1,000 kg/h
Screen hole size (capacity table)0.3 – 6 mm
Particle sizeup to 120 MESH
Grinding boxes1
Power supplyThree-phase
StarterNot included

Which motor should I choose?

For fine grinding with a screen under 1.2 mm, the 10 hp motor is enough, because the limit is the grinding box, not the power; above 1.5 mm, choose the 15 hp motor. Between 1.2 and 1.5 mm, a specialist will recommend the motor.

Dimensions and installation details: talk to a specialist.

Request the full specifications

Necessary installations

  • As this is an industrial Mill, even though it is small, we recommend using three-phase power to connect the 10 hp motor.
  • The starter is not included with the mill: we suggest a star-delta starter or a soft-starter, as required. The electrical connection must be made by an industrial electrician.
  • It comes with an instruction manual in Portuguese (Printed and Digital) explaining the whole assembly and installation process.
Vieira MCS hammer mill manual: what it covers and how to request it

MCS 350 production capacity

Reference output in kg/h by screen. The highlighted row is this model; compare it with the rest of the line.

Reference: degermed corn (canjica)Grinding under ideal operating conditions. Actual capacity depends on the product, moisture and particle size. Confirm it with a grinding test.
Production capacity by model and screen (kg/h)
Cornmeal productionAnimal feed production
ModelScreen 0.3 mmScreen 0.7 mmScreen 1.0 mmScreen 3.0 mmScreen 6.0 mm
MCS 190MCS Series1020336683
MCS 280MCS Series3060120240300
MCS 350This modelMCS Series851502505001,000
MCD 530MCD Series1803505501,0002,000
MCD 680BMCD Series2755007502,0003,000
MCD 680AMCD Series5251,0001,5004,0006,000
MCD 950MCD Series1,0002,1003,1008,00012,000

Want to know how much this mill produces with your product?

Send us a sample: we run a free grinding test and recommend the ideal model, screen and capacity.

Request a free grinding test

See the mill in operation

Hammer mill MCS 350 (10 hp)

Technical drawing

Tap or click the drawing to open it full screen and zoom into the details.

Technical drawing of the hammer mill MCS 350
MCS 350 technical drawing

MCS 350: frequently asked questions

What motor power does the MCS 350 have, and when should I choose the larger motor?
The MCS 350 is sold with a 10 hp or a 15 hp motor: the frame takes either one. For fine grinding with a screen under 1.2 mm, the 10 hp motor is enough, because the limit is the grinding box, not the power; above 1.5 mm, choose the 15 hp motor. Between 1.2 and 1.5 mm, a specialist will recommend the motor.
How much does the MCS 350 weigh and how much space does it need?
With the motor, the MCS 350 weighs 170 kg. It needs a working area of 1.5 m², not counting the cyclone. The full installation, including the cyclone and the bag filter, is 3.7 m long.
Does the MCS 350 need a concrete base or anchoring to the floor?
No. Thanks to the mill's balancing, it does not need to be anchored to the floor.
Is the MCS 350 three-phase? Is a starter included?
Yes, the MCS 350 runs on three-phase power, and the electrical connection must be made by an industrial electrician. The starter is not included: we suggest a star-delta starter or a soft-starter, as required.
What comes with the MCS 350?
The MCS 350 leaves the factory assembled, tested and adjusted, and comes with a polyethylene cyclone with tripod, a bag filter housing with filter bags and a feed hopper.

More about the MCS 350

Read the full text about the MCS 350

However, production in Kg/hour is almost triple. This grinding equipment can work continuously and provides excellent productivity combined with optimum final product quality where, in micronized grinding with Ø 0.3 mm hole mill screens (Conical Hole), it is possible to achieve fine granulometric standards of up to 120 MESH depending on the product to be processed.

Hammer mill for micronized grinding

Successfully applied to a wide range of products: food, cosmetics and pharmaceuticals, with grinding screens with holes from Ø 0.3 mm.

  • Grain, Cereal and Spice grinding
  • Grinding of Natural Products
  • Pre-mix formulation grinding
  • Pharmaceutical Products grinding
  • Cosmetics Products Grinding
  • Reprocessing Grinding

Tailor-made solutions for every need

This grinding equipment provides excellent productivity combined with optimum final product quality where, in micronized grinding with Mill screens with holes from Ø 0.3 mm (Conical Hole), it is possible to achieve granulometric standards of up to 120 MESH depending on the product to be processed.

Hammer mill quote

Request a quote for your mill

Tell us what you need to grind and the desired capacity. With this information, our Technical Consulting and Sales team will recommend a model and prepare your quote.

  • Model, screen and capacity recommended for your product
  • Proposal prepared by our Technical Consulting and Sales team
  • Free grinding test with your sample, if you need one

Prefer to talk?

Mon–Thu, 8am–5pm · Fri, 8am–4pm (Brazil time)

Only name, email and phone are required (*). Everything else is optional and helps us respond faster.

Roughly how many kilos per hour. An estimate is enough; if you are not sure, leave it blank.

By motor power. If in doubt, our technical team will recommend the right model.

With country and area code.

We use the data in this form to answer your request and prepare our sales response. If you accepted statistics or marketing cookies, the pages you visited on this site will be linked to your request. Learn more in our Privacy notice.

Chat on WhatsApp

Fill in the fields and you will go straight to our team's WhatsApp.

We use the data in this form to answer your request and prepare our sales response. If you accepted statistics or marketing cookies, the pages you visited on this site will be linked to your request. Learn more in our Privacy notice.