Skip to content

Brazilian manufacturer since 1948 · Exports to more than 30 countries

MCD Series · Double Centrifugal Mill

Hammer mill MCD 950 (100 hp)

Updated on By Moinhos Vieira – technical team

The Double Centrifugal Mill – MCD 950 (100 hp). This is the largest mill manufactured by Moinhos Vieira.

Motor power
100 or 125 hp
Production capacity
1,000 to 12,000 kg/h
Screen hole size
0.3 – 6 mm
Particle size
up to 100 MESH
Hammer mill MCD 950 (100 hp)

Ask about grinding on the MCD 950

Answers based on the grinding tests Vieira has already run. Figures are estimates, confirmed in the free test with your sample or with our technical service team.

Do not write personal data here. To be contacted by our team, use the button below.

Request free test / quote

Main features

The Vieira MCD 950 Mill (100 hp) is already a medium to large industrial mill. It is very well suited to companies that need good productivity in micronized grinding, as the double centrifugal grinding system enables a better ratio of electric motor performance to final production.

Suitable for

  • Natural Products line
  • Pre-mix Formulations
  • Cosmetics
  • Chemicals
  • Made from 304 stainless steel or 1020 carbon steel with white epoxy paint
  • Easy to replace spare parts such as hammers, screens and impellers
  • High output ratio
  • Two 360° grinding boxes
  • Does not need to be fixed to the ground
  • Continuous suction feed
  • Designed for micronizing grains, cereals and spices
  • Guaranteed technical assistance and maintenance

Specifications

Specifications · MCD 950
SeriesMCD Series · Double Centrifugal Mill
Motor power100 or 125 hp
Shaft speed2,500 rpm
Weight with motor1,800 kg
Number of hammers96
Working area (without cyclone)9.0 m²
Full installation length7.55 m
Production capacity1,000 to 12,000 kg/h
Screen hole size (capacity table)0.3 – 6 mm
Particle sizeup to 100 MESH
Grinding boxes2 (double grinding)
Power supplyThree-phase
StarterNot included

Which motor should I choose?

For fine grinding with a screen under 1.2 mm, the 100 hp motor is enough, because the limit is the grinding box, not the power; above 1.5 mm, choose the 125 hp motor. Between 1.2 and 1.5 mm, a specialist will recommend the motor.

Dimensions and installation details: talk to a specialist.

Request the full specifications

Necessary instalation

  • We recommend that an industrial electrician install this mill, as it is a more robust piece of equipment.
  • This mill, model MCD 950 (100 hp), does not come with a starter, but we recommend using a Soft-Starter starter.
  • It comes with an instruction manual in Portuguese (Printed and Digital) explaining all the assembly and installation.
Vieira MCD hammer mill manual: what it covers and how to request it

MCD 950 production capacity

Reference output in kg/h by screen. The highlighted row is this model; compare it with the rest of the line.

Reference: degermed corn (canjica)Grinding under ideal operating conditions. Actual capacity depends on the product, moisture and particle size. Confirm it with a grinding test.
Production capacity by model and screen (kg/h)
Cornmeal productionAnimal feed production
ModelScreen 0.3 mmScreen 0.7 mmScreen 1.0 mmScreen 3.0 mmScreen 6.0 mm
MCS 190MCS Series1020336683
MCS 280MCS Series3060120240300
MCS 350MCS Series851502505001,000
MCD 530MCD Series1803505501,0002,000
MCD 680BMCD Series2755007502,0003,000
MCD 680AMCD Series5251,0001,5004,0006,000
MCD 950This modelMCD Series1,0002,1003,1008,00012,000

Want to know how much this mill produces with your product?

Send us a sample: we run a free grinding test and recommend the ideal model, screen and capacity.

Request a free grinding test

See the mill in operation

Hammer mill MCD 950 (100 hp)

Technical drawing

Tap or click the drawing to open it full screen and zoom into the details.

Technical drawing of the hammer mill MCD 950
MCD 950 technical drawing

MCD 950: frequently asked questions

What motor power does the MCD 950 have, and when should I choose the larger motor?
The MCD 950 is sold with a 100 hp or a 125 hp motor: the frame takes either one. For fine grinding with a screen under 1.2 mm, the 100 hp motor is enough, because the limit is the grinding box, not the power; above 1.5 mm, choose the 125 hp motor. Between 1.2 and 1.5 mm, a specialist will recommend the motor.
How much does the MCD 950 weigh and how much space does it need?
With the motor, the MCD 950 weighs 1,800 kg. It needs a working area of 9.0 m², not counting the cyclone. The full installation, including the cyclone and the bag filter, is 7.55 m long.
Does the MCD 950 need a concrete base or anchoring to the floor?
No. Thanks to the mill's balancing, it does not need to be anchored to the floor. It must, however, stand on a solid surface free of vibration and away from machines that vibrate.
Is the MCD 950 three-phase? Is a starter included?
Yes, the MCD 950 runs on three-phase power, and the electrical connection must be made by an industrial electrician. The starter is not included; we recommend a soft-starter.
What comes with the MCD 950?
The MCD 950 leaves the factory assembled, tested and adjusted, and comes with a cyclone and a bag filter housing with filter bags.

More about the MCD 950

Read the full text about the MCD 950

This equipment enables high production of micronized flours. As it is a double mill coupled to aspirated rotors, even in fine granulometries, this mill provides uniform grinding without an increase in temperature in the final processed product. Due to the pre-grinding that takes place in the first grinding box (Lower Side), the pre-grinded product is then transferred through a pipe which automatically supplies the second grinding box (Upper Side), and then the grinding is completed, thus achieving the required granulometric standard. Double grinding increases production capacity compared to motorization, providing better energy efficiency of the mill. Successfully applied to various products such as maize meal, rice flour and micronized pre-mix formulations on a 0.3 mm screens.

Hammer mill for micronized grinding

Successfully applied to a wide range of products: food, cosmetics and pharmaceuticals, with grinding screens with holes from Ø 0.3 mm.

  • Grain, cereal and spice grinding
  • Grinding of Natural Products
  • Pre-mix formulation grinding
  • Pharmaceutical products grinding
  • Cosmetics Products Grinding
  • Reprocessing Grinding

Hammer mill quote

Request a quote for your mill

Tell us what you need to grind and the desired capacity. With this information, our Technical Consulting and Sales team will recommend a model and prepare your quote.

  • Model, screen and capacity recommended for your product
  • Proposal prepared by our Technical Consulting and Sales team
  • Free grinding test with your sample, if you need one

Prefer to talk?

Mon–Thu, 8am–5pm · Fri, 8am–4pm (Brazil time)

Only name, email and phone are required (*). Everything else is optional and helps us respond faster.

Roughly how many kilos per hour. An estimate is enough; if you are not sure, leave it blank.

By motor power. If in doubt, our technical team will recommend the right model.

With country and area code.

We use the data in this form to answer your request and prepare our sales response. If you accepted statistics or marketing cookies, the pages you visited on this site will be linked to your request. Learn more in our Privacy notice.

Chat on WhatsApp

Fill in the fields and you will go straight to our team's WhatsApp.

We use the data in this form to answer your request and prepare our sales response. If you accepted statistics or marketing cookies, the pages you visited on this site will be linked to your request. Learn more in our Privacy notice.