# Hammer mill MCS 350 (10 hp)

URL: https://moinhosvieira.com.br/en/hammer-mill-vieira-mcs-350-10-hp/  
Updated on: 2026-11-04  
Other languages: Español: https://moinhosvieira.com.br/es/molino-de-martillos-vieira-mcs-350-10hp/ · Português: https://moinhosvieira.com.br/moinho-de-martelo-vieira-mcs-350-10-cv/

> The MCS 350 Single Centrifugal Hammer Mill (10 hp) is the second mill in the MCS series. It is a larger grinding machine than its predecessor (MCS 280 Hammer Mill), as it is equipped with double the motorization, in this case 10 HP/hp.

## Specifications

| Item | Value |
| --- | --- |
| Series | MCS Series · Single Centrifugal Mill |
| Motor power | 10 or 15 hp |
| Production capacity | 85 to 1,000 kg/h |
| Screen hole size (capacity table) | 0.3 – 6 mm |
| Particle size | up to 120 MESH |
| Shaft speed | 6,000 rpm |
| Weight with motor | 170 kg |
| Number of hammers | 30 |
| Working area (without cyclone) | 1.5 m² |
| Full installation length | 3.7 m |
| Grinding boxes | 1 |
| Power supply | Three-phase |
| Starter | Not included · we suggest a star-delta starter or a soft-starter, as required |

## Reference capacity (kg/h)

Reference: degermed corn (canjica)*

| Model | Screen 0.3 mm | Screen 0.7 mm | Screen 1.0 mm | Screen 3.0 mm | Screen 6.0 mm |
| --- | --- | --- | --- | --- | --- |
| MCS 350 | 85 | 150 | 250 | 500 | 1,000 |

*Grinding under ideal operating conditions. Actual capacity depends on the product, its moisture and the screen hole size. Confirm it with a grinding test.

## Frequently asked questions

### What motor power does the MCS 350 have, and when should I choose the larger motor?

The MCS 350 is sold with a 10 hp or a 15 hp motor: the frame takes either one. For fine grinding with a screen under 1.2 mm, the 10 hp motor is enough, because the limit is the grinding box, not the power; above 1.5 mm, choose the 15 hp motor. Between 1.2 and 1.5 mm, a specialist will recommend the motor.

### How much does the MCS 350 weigh and how much space does it need?

With the motor, the MCS 350 weighs 170 kg. It needs a working area of 1.5 m², not counting the cyclone. The full installation, including the cyclone and the bag filter, is 3.7 m long.

### Does the MCS 350 need a concrete base or anchoring to the floor?

No. Thanks to the mill's balancing, it does not need to be anchored to the floor.

### Is the MCS 350 three-phase? Is a starter included?

Yes, the MCS 350 runs on three-phase power, and the electrical connection must be made by an industrial electrician. The starter is not included: we suggest a star-delta starter or a soft-starter, as required.

### What comes with the MCS 350?

The MCS 350 leaves the factory assembled, tested and adjusted, and comes with a polyethylene cyclone with tripod, a bag filter housing with filter bags and a feed hopper.

The Vieira MCS 350 Mill (10 hp) is the right equipment for those who need to increase their production capacity without giving up space and flexibility when grinding various food products. Easy to handle, robust and compact, it is ideal for good production in small spaces and also for places where electricity is limited, as it uses a motor of only 10 Hp.

## Main features

- Made from 304 stainless steel or 1020 carbon steel with white epoxy paint
- Easy replacement of spare parts such as hammers, screens and rotor
- High output ratio
- A 360° grinding box
- Does not need to be fixed to the ground
- Continuous suction feed
- Designed for micronizing grains, cereals and spices
- Guaranteed technical assistance and maintenance

## Necessary installations

- As this is an industrial Mill, even though it is small, we recommend using three-phase power to connect the 10 hp motor.
- The starter is not included with the mill: we suggest a star-delta starter or a soft-starter, as required. The electrical connection must be made by an industrial electrician.
- It comes with an instruction manual in Portuguese (Printed and Digital) explaining the whole assembly and installation process.

However, production in Kg/hour is almost triple. This grinding equipment can work continuously and provides excellent productivity combined with optimum final product quality where, in micronized grinding with Ø 0.3 mm hole [mill screens](https://moinhosvieira.com.br/en/screens-for-mills/) (Conical Hole), it is possible to achieve fine granulometric standards of up to 120 MESH depending on the product to be processed.

## Hammer mill for micronized grinding

Successfully applied to a wide range of products: food, cosmetics and pharmaceuticals, with grinding screens with holes from Ø 0.3 mm.

- Grain, Cereal and Spice grinding
- Grinding of Natural Products
- Pre-mix formulation grinding
- Pharmaceutical Products grinding
- Cosmetics Products Grinding
- Reprocessing Grinding

## Tailor-made solutions for every need

This grinding equipment provides excellent productivity combined with optimum final product quality where, in micronized grinding with [Mill screens](https://moinhosvieira.com.br/en/screens-for-mills/) with holes from Ø 0.3 mm (Conical Hole), it is possible to achieve granulometric standards of up to 120 MESH depending on the product to be processed.
